To Next PageTo Next Page
Need help?Do you have a question about the Torin BIG RED T83012 and is the answer not in the manual?
Emphasizes reading and understanding the entire manual before operating or repairing the product to ensure safety.
Highlights critical factors for safe operation, emphasizing operator understanding and common sense.
Details the essential inspection steps before each use to ensure the jack is in good working condition.
Clarifies that the jack is for lifting only and vehicles must be supported by jack stands after lifting.
Stresses the critical importance of using approved jack stands for load support and warns against non-approved devices.
Lists essential safety markings and operating rules for safe and proper use of the jack.
Instructions on correct jack placement, using jack stands, and avoiding overload or improper surfaces.
Details on chocking wheels, centering loads, and essential personal protective equipment and alertness.
Covers specific usage limitations, training requirements, and rules for spectators during operation.
Notes on regular inspection, part replacement, modification prohibition, and proper storage of the jack.
Steps for assembling the jack handle, including connecting pieces and securing the handle socket with a screw.
Critical warnings during assembly, such as caution when removing the retaining clip and not carrying the jack by its handle.
Steps to take before operating the jack, including reading the manual, purging air, and inspecting components.
Detailed instructions on how to safely raise a vehicle using the jack, including wheel blocking and proper saddle centering.
A critical caution regarding the lift control valve, prohibiting disabling it by any means other than the operator's hand.
Covers inspection, cleaning, lubrication, rust prevention, and grease fittings for maintaining the jack.
Explains the hydraulic mechanism of the jack and provides instructions for proper storage to prevent rust and corrosion.
Crucial warnings about using only approved hydraulic jack oil and proper disposal methods.
Advice on checking pump piston/ram for rust and retracting components during storage.
General