Need help?Do you have a question about the Tormach 1100M Enclosure Kit and is the answer not in the manual?
Provides details about the 1100M Enclosure Kit, including part numbers and support contact information.
Outlines preparatory steps before installation, including inspection, cleaning, and verifying components.
Lists the necessary tools required for the installation procedure.
Instructions for installing the main enclosure panels onto the machine.
Guide for installing the linear rail systems for the enclosure doors.
Steps for assembling and mounting the front doors of the enclosure.
Procedures for installing the LED floodlights into the enclosure.
Instructions for fitting the side windows into the enclosure panels.
Steps for installing the access panel for maintenance or inspection.
Guide for attaching the stainless steel wear guard for protection.
Instructions on applying maintenance labels to the enclosure windows.
Details for attaching the left side panel of the enclosure.
Instructions for fitting the retainers for the left side windows.
Steps for attaching the left front panel to the enclosure.
Instructions for installing the enclosure splice plate.
Steps for attaching the right rear panel to the enclosure.
Details for attaching the right side panel of the enclosure.
Instructions for fitting the retainers for the right side windows.
Steps for attaching the right front panel to the enclosure.
Instructions for attaching the left top panel of the enclosure.
Instructions for attaching the right top panel of the enclosure.
Steps for installing the upper front panel of the enclosure.
Instructions for attaching the front lower panel to the enclosure.
Guide for installing the rear splash shield.
Detailed steps for assembling the individual linear rail components.
Instructions for mounting the assembled linear rails onto the enclosure.
Steps for preparing and assembling the front doors, including windows and trim.
Instructions for attaching the assembled front doors to the enclosure's linear rails.
Steps for attaching the door latch strike plate and the latch mechanism.
Procedures for verifying and installing the floodlights into the enclosure.
Instructions for preparing and installing the side windows, including rubber trim.
Steps for installing the access panel, including hole plugs and rubber trim.
Instructions for attaching the stainless steel wear guard to the lower front panel.
Guide for writing the installation date on maintenance labels for the windows.
Lists part numbers for replacement windows.
Visual representation of enclosure components with numbered parts.
A detailed list of all enclosure parts with IDs, descriptions, and quantities.
Provides details about the 1100M Enclosure Kit, including part numbers and support contact information.
Outlines preparatory steps before installation, including inspection, cleaning, and verifying components.
Lists the necessary tools required for the installation procedure.
Instructions for installing the main enclosure panels onto the machine.
Guide for installing the linear rail systems for the enclosure doors.
Steps for assembling and mounting the front doors of the enclosure.
Procedures for installing the LED floodlights into the enclosure.
Instructions for fitting the side windows into the enclosure panels.
Steps for installing the access panel for maintenance or inspection.
Guide for attaching the stainless steel wear guard for protection.
Instructions on applying maintenance labels to the enclosure windows.
Details for attaching the left side panel of the enclosure.
Instructions for fitting the retainers for the left side windows.
Steps for attaching the left front panel to the enclosure.
Instructions for installing the enclosure splice plate.
Steps for attaching the right rear panel to the enclosure.
Details for attaching the right side panel of the enclosure.
Instructions for fitting the retainers for the right side windows.
Steps for attaching the right front panel to the enclosure.
Instructions for attaching the left top panel of the enclosure.
Instructions for attaching the right top panel of the enclosure.
Steps for installing the upper front panel of the enclosure.
Instructions for attaching the front lower panel to the enclosure.
Guide for installing the rear splash shield.
Detailed steps for assembling the individual linear rail components.
Instructions for mounting the assembled linear rails onto the enclosure.
Steps for preparing and assembling the front doors, including windows and trim.
Instructions for attaching the assembled front doors to the enclosure's linear rails.
Steps for attaching the door latch strike plate and the latch mechanism.
Procedures for verifying and installing the floodlights into the enclosure.
Instructions for preparing and installing the side windows, including rubber trim.
Steps for installing the access panel, including hole plugs and rubber trim.
Instructions for attaching the stainless steel wear guard to the lower front panel.
Guide for writing the installation date on maintenance labels for the windows.
Lists part numbers for replacement windows.
Visual representation of enclosure components with numbered parts.
A detailed list of all enclosure parts with IDs, descriptions, and quantities.
General| Material | Steel and polycarbonate |
|---|---|
| Compatibility | Tormach 1100M CNC Mill |
| Windows | Polycarbonate windows |
| Installation | Bolt-on installation |
| Coolant Containment | Integrated coolant tray |
To Next Page