1.1 PURPOSE
This document gives instructions on installing and using an
Automatic Tool Changer (ATC)for 770MX.
1.2 PRODUCT INFORMATION
Product: Automatic Tool Changer (ATC)for 770MX (PN 39290)
The Automatic Tool Changer (ATC) holds up to 10 tools in a single
tray. If your program requires more tools, the ATC changes tools
automatically for all tools assigned to the tray, and pauses for a
manual tool change for all tools not assigned to the tray.
Note: If any of these items are missing, we can help. Email
support@tormach.com to contact Tormach Technical
Support for guidance on how to proceed.
Page 2
©Tormach® 2019
Specifications subject to change without notice.
tormach.com
TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1019A)
TECHNICAL DOCUMENT
To Next Page
Loading...
