Need help?Do you have a question about the Tormach 1100M and is the answer not in the manual?
Detailed safety precautions for general shop, operational, electrical, and noise exposure.
Details on electrical power needs, circuit requirements, and non-conforming site options.
Step-by-step guide for installing essential machine components like motors and bellows.
Instructions for installing optional machine accessories like oilers and tool changers.
Configuration steps for the PathPilot controller, including date, time, and language settings.
Guide on loading, editing, and previewing G-code files within PathPilot.
Procedures for using probes, setting tool length offsets, and work offsets.
Instructions on starting, stopping, and controlling G-code programs.
Features for controlling program execution like feed hold, overrides, and single block mode.
Procedure for measuring tool lengths using reference height or ETS.
Detailed reference for G-codes, including linear motion, arcs, and canned cycles.
Diagnosing issues with axes movement, drivers, and limit switches.
Troubleshooting for spindle not turning, loud operations, or tool loading issues.
Diagnosing issues with the touchscreen, buttons, and knobs on the operator console.
Detailed safety precautions for general shop, operational, electrical, and noise exposure.
Details on electrical power needs, circuit requirements, and non-conforming site options.
Step-by-step guide for installing essential machine components like motors and bellows.
Instructions for installing optional machine accessories like oilers and tool changers.
Configuration steps for the PathPilot controller, including date, time, and language settings.
Guide on loading, editing, and previewing G-code files within PathPilot.
Procedures for using probes, setting tool length offsets, and work offsets.
Instructions on starting, stopping, and controlling G-code programs.
Features for controlling program execution like feed hold, overrides, and single block mode.
Procedure for measuring tool lengths using reference height or ETS.
Detailed reference for G-codes, including linear motion, arcs, and canned cycles.
Diagnosing issues with axes movement, drivers, and limit switches.
Troubleshooting for spindle not turning, loud operations, or tool loading issues.
Diagnosing issues with the touchscreen, buttons, and knobs on the operator console.
General| Machine Type | CNC Milling Machine |
|---|---|
| Z-Axis Travel | 16.25" |
| Spindle Taper | R8 |
| Maximum Table Load | 500 lbs |
| Control System | PathPilot |
| X-Axis Travel | 18.0 in (457 mm) |
| Y-Axis Travel | 9.5 in (241 mm) |
| Spindle Motor | 1.5 hp (1.1 kW) |
| Tool Changer | Optional |
| Power Requirements | 220V, Single Phase |
To Next Page
