1: SAFETY
WARNING! Indicates a hazard with a medium level
of risk which, if not avoided, can result in death or
serious injury.
CAUTION! Indicates a hazard with a low level of risk
which, if not avoided, can result in minor or moderate
injury.
Property Damage
NOTICE! Indicates a hazard which, if not avoided, can
cause property damage.
1.3.2 Safety Decals
Before operating the machine in any way, you must read and
understand all installed safety decals on the machine and
equipment. Do not remove any safety decals. If any safety
decals become worn or damaged, contact Tormach Technical
Support for guidance on receiving replacement decals.
The following types of safety symbols are on the decals:
l
Warning This symbol indicates a hazard which, if not
avoided, can result in personal injury or property
damage.
l
Prohibition This symbol indicates an action that
shall not be taken or that shall be stopped.
l
Mandatory Action This symbol indicates an action
that you must take to avoid a hazard.
On the Electrical Cabinet Door
Figure 1-1: Example of a safety decal on the electrical
cabinet door.
1. WARNING! Electrocution Hazard. Points in the electrical
cabinet contain high voltages, which can electrocute or
shock you, causing death or serious injury. Even after the
machine is powered off, electronic devices in the
electrical cabinet can retain dangerous electrical
voltages. Use caution when servicing the machine inside
the electrical cabinet.
2. Lockout/Tagout. Before servicing the machine, you must
power off the machine and use an approved
lockout/tagout device to secure the Main Disconnect
switch in the OFF position. Points in the electrical
cabinet contain high voltages, which can electrocute or
shock you, causing death or serious injury.
Next to the Main Disconnect
Figure 1-2: Example of a safety decal next to the Main
Disconnect.
1. WARNING! Entanglement / Entrapment Hazard. The
machine operates under automatic control — it can start
at any time and crush, cut, entangle, or pinch body
parts.Always keep clear of positions on the machine
where unexpected or unintended machine motion could
cause harm. Before operating this machine in any way,
you must verify that all operators know the location of
the machine's Emergency Stop button.
2. WARNING! Ejection Hazard. Fixtures, tooling,
workpieces, or other loose items can become dangerous
projectiles and can cause death or serious injury. Before
operating this machine in any way, you must verify that
you have appropriately secured all components.
©Tormach® 2023
Specifications subject to change without notice.
Page 23 Tormach 1100M® Operator's Manual (Version 1223A)
For the most recent version, see tormach.com/support
To Next Page
Loading...
