Tormach 1100M - The Screen Doesnt Display an Image or Respond to Power Button; The Screen Is Scrambled or Illegible

12: TROUBLESHOOTING
©Tormach® 2023
Specifications subject to change without notice.
Page 255 Tormach 1100M® Operator's Manual (Version 1223A)
For the most recent version, see tormach.com/support
12.10.2 The Screen Doesn't Display an Image or Respond to Power Button
Problem
The console screen doesn't display an image or respond to the power button.
Cause
The console isn't receiving power.
Solutions
You Might
Need To...
Probability How-To Steps Need More?
Examine
power input
to the
console.
High
Examine the green LED on the power
brick for the console. If it's not lit,
examine the power cords to the power
brick.
If your console receives power from the Accessory Input
ports on the machine, look for tripped breakers inside
your machine's electrical cabinet.
Test the
power button
functionality.
Low
Examine the green ring around the
power button. It should light up when
you press the power button.
12.10.3 The Screen is Scrambled or Illegible
Problem
The console screen turns on, but is scrambled or illegible.
Cause
The BIOS isn't configured for the correct screen output.