Need help?Do you have a question about the Tormach 770MX and is the answer not in the manual?
States the document's objective: providing instructions for installing and using the ATC for 770MX.
Describes the ATC's capacity and basic function, including how it handles tools assigned or not assigned to the tray.
Lists essential tools needed for installation and verification, advising to collect them beforehand.
Details site air supply requirements including pressure, dry air, and lubrication.
Instructions to prepare the machine by removing items and centering the table before installation.
Outlines the sequence of steps for installing the ATC, starting with disassembly.
Introduces the process for final alignments, mentioning adjustments to tool tray height and encoder position.
Use any tool number, from 1-1000, to assign a position in the tool tray.
Instructions for loading a tool into the spindle and assigning it to an open slot in the tool tray.
Steps to unload a tool from the tray, including fetching from the tray and unloading from spindle.
Procedure to load a tool into the spindle by opening and closing the collet.
Steps for manually unassigning and moving a tool from the tray, including using the Delete button.
Methods to retrieve a tool from the tray, either via MDI command or by typing tool number.
How to prevent the ATC from making automatic tool changes by selecting the Manual Tool Change option.
States the document's objective: providing instructions for installing and using the ATC for 770MX.
Describes the ATC's capacity and basic function, including how it handles tools assigned or not assigned to the tray.
Lists essential tools needed for installation and verification, advising to collect them beforehand.
Details site air supply requirements including pressure, dry air, and lubrication.
Instructions to prepare the machine by removing items and centering the table before installation.
Outlines the sequence of steps for installing the ATC, starting with disassembly.
Introduces the process for final alignments, mentioning adjustments to tool tray height and encoder position.
Use any tool number, from 1-1000, to assign a position in the tool tray.
Instructions for loading a tool into the spindle and assigning it to an open slot in the tool tray.
Steps to unload a tool from the tray, including fetching from the tray and unloading from spindle.
Procedure to load a tool into the spindle by opening and closing the collet.
Steps for manually unassigning and moving a tool from the tray, including using the Delete button.
Methods to retrieve a tool from the tray, either via MDI command or by typing tool number.
How to prevent the ATC from making automatic tool changes by selecting the Manual Tool Change option.
General| Brand | Tormach |
|---|---|
| Model | 770MX |
| Category | Industrial Equipment |
| Language | English |
To Next Page
