tormek SVM-00 - SVM-00 Small Knife Holder; Small Knives; Positioning of Machine; Design and Components

3
EN
SVM-00 Small Knife Holder
SMALL KNIVES
Positioning of Machine
Sharpening direction: Towards or away from
the edge.
Note The height of the bench
must not be too high when
grinding towards the edge.
550–650 mm (22–26") is suitable
depending on your height.
Design
The SVM-00 Small Knife Holder complements the
SVM-45 Knife Jig. It extends the usage so that you can
sharpen even the smallest knives.
It consists of a Guide Bar (1), a Handle Grip (2), and an
Adjustable Clamp (3). The knife handle is fastened with
the Knob (4). The holder is designed to securely hold the
knife without damaging the handle.
The Guide Bar (1) mounts in the jaws of the SVM-45
Knife Jig and you sharpen using the same technique as
for the knife jig. The exact edge angle is set by turning
the Adjustable Stop (6) or using the Micro Adjust on the
Universal Support.
Various carving knives, skew knives
and pocket knives.
SVM-45