Need help?Do you have a question about the tormek T7 and is the answer not in the manual?
Defines parameters like grinding angle (Δ), adjustable length (A), and support distance (S) used in the adjustment process.
Defines parameters like grinding angle (Δ), adjustable length (A), and support distance (S) used in the adjustment process.
General| Model | T7 |
|---|---|
| Category | Grinder |
| Motor Power | 200 W |
| Voltage | 230 V |
| Grinding Wheel | SG-250 |
| Grinding Wheel Diameter | 250 mm |
| Grinding Wheel Width | 50 mm |
| Main Shaft | Stainless Steel |
| Speed | 90 RPM |
| Duty Cycle | Continuous |
| Frequency | 50 Hz |
| Protection Class | IP 20 |
| Honing Wheel Diameter | 220 mm |
| Motor Type | Induction |
| Dimensions | 270 x 270 x 330 mm |
| Housing | Zinc Cast |
To Next Page