31
TROUBLESHOOTING GUIDE
BATTERY POWER LEVEL INDICATOR FAULT CODES
TRANSAXLE DRIVE UNITS
CODE FLASHING LEDS CAUSE SOLUTION
One Low voltage shut-o. Brush motor shut down
Recharge batteries
Check battery connections
Two Battery charge level getting low Recharge batteries
Three
Traction drive motor tripped
Remove overload condition
and reset
Traction drive motor has short circuited
Contact a service center for
testing
Four Battery lockout has occurred Recharge batteries right away
Eight Controller tripped
Contact a service center for
testing
Ten High battery voltage reading Check battery connections
None Indicator is in sleep mode
Turn power key o then on to
restore
Sequencing lights Activation handle is engaged Release activation bail
To Next Page
Loading...
Need help?
General