Tornado BD 26/27 User Manual (English)

Questions and Answers:

M
Michael GriffinAug 10, 2025
Why is the squeegee on my Tornado BD 26/27 Scrubber not drying perfectly?
- L
  Lauren MitchellAug 10, 2025
  If the squeegee on your Tornado Scrubber isn't drying perfectly, first ensure the suction function is activated and the recovery tank isn't full. Then, check that the squeegee rubbers are clean. Verify the height and inclination of the squeegee are properly adjusted. Also, make sure the suction and squeegee hoses are correctly inserted in their seats on the recovery tank. Clean the suction filter and the squeegee hose. Finally, inspect the rubbers for wear and turn or replace them if needed.
M
Michael KaneAug 17, 2025
How to troubleshoot vacuum motor not working on Tornado BD 26/27 Scrubber?
- H
  Haley MccoyAug 17, 2025
  If the vacuum motor on your Tornado Scrubber isn't working, start by verifying that the key switch is turned clockwise to switch on the machine. If alarm signals are displayed, switch the machine off and on again to restore functionality. Check the battery charge level on the display. Ensure you've correctly activated the drying function. Also, check that the recovery tank isn't full. If the signal lamp is on in both manual and auto modes, but the suction system still doesn't work, contact authorized technical assistance.
A
Ashley WeeksAug 22, 2025
What to do if water does not come down onto the brushes or is insufficient in Tornado Scrubber?
- J
  Joseph CortezAug 22, 2025
  If the water isn't coming down onto the brushes of your Tornado Scrubber or is insufficient, first verify that the key switch is turned clockwise to switch on the machine. Then, check the battery charge level on the display. Make sure you've correctly activated the washing function with the brushes. Confirm that the solution valve is open. If the signal lamp is on in both manual and auto modes but the detergent solution doesn't come down, check the liquid level in the tank. Also, check that the solution filter and the inner filter of the solution tank are clean. If the problem persists, contact authorized technical assistance.
S
smithangelaAug 29, 2025
Why is the traction motor not working on my Tornado BD 26/27?
- C
  Candice ClarkAug 29, 2025
  If the traction motor on your Tornado Scrubber isn't working, first, sit on the seat. Then, verify that the key switch is positioned clockwise to switch on the machine and that the battery is charged. Next, press the accelerator pedal on the right side to start the machine. If the problem continues, contact authorized technical assistance.