The upper left section hosts the Tornatech Inc. business card by default. This image can be changed by the service
dealer to incorporate a customized image. The image must have been created by Tornatech Inc., sent to the
service dealer and copied on a USB Device. The “Level 1” user can update the image by pressing the Tornatech
logo when the USB Device containing the business card is inserted into the USB port. Please contact factory for
more details.
The box situated just right of the business card is related to the “Pump Curve”. The ViZiTouch allows the for
recording of up to 10 different pump curves. The date and time of the last pump curve recorded is displayed here.
The “NEW” button allows the user to record a new pump curve. Clicking this button will redirect the user to the “New
Pump Curve” page. See the “New Pump Curve” help section for more details on how to record a new pump curve.
The user can see both the date of the last service done and the date of the next service at the bottom of the screen.
Access level 1:
- Change the period before the next service is required by pressing the white box between the “Last Done” date and
the “Next On” date. The “Next On” date will be adjusted automatically depending on the period selected and the
date of the last service.
When the required service is done, the user must click on the “Service Done” button to commit and end the service.
To Next Page
Loading...
