Need help?Do you have a question about the Tornatech GPX and is the answer not in the manual?
General| Listings | UL |
|---|---|
| Phase | Three Phase |
| Starting Method | Soft Start |
| Enclosure | NEMA 4 |
| Communication | Modbus RTU |
| Protection | Phase Loss |
Details different models of electric fire pump controllers available.
Explains automatic and manual methods for starting and stopping the fire pump motor.
Describes the automatic process of switching between normal and alternate power sources.
Covers controller location, mounting, and environmental considerations.
Guidelines for connecting power sources and motor wiring to the controller.
Identifies and explains the function of each terminal on the controller's strips.
Introduces the touch screen interface and its main components.
Explains how to navigate and interpret information on the controller's home page.
Details the screen dimming and blanking behavior for energy saving.
Displays active and occurred alarms, their types, and states.
Covers setting up essential parameters like pressure units and test frequencies.
Accesses detailed settings for timers, system parameters, and special functions.
Guides on installing, configuring, and calibrating various system sensors.
Manages controller defaults, software updates, and system resets.
Accesses event records and allows downloading data to a USB device.
Reviews performance statistics since the first or last service.
Visualizes and analyzes pressure and power curves for pump performance.
Lists patents and other technical documents related to the controller.
Checklist for initial installation and equipment verification before testing.
Document for recording results of the final acceptance tests.
To Next Page
