36 (64)
MAINTENANCE OPERATIONS
TKU--- C 01140--- 1 EN 0404
D
DD
D Check axle fasten in g s visually
D
DD
D Measure wear to th e brake linings
Apply the parking brake.
Push in pin until it contacts reaction plate.
If the wear indicator pin reaches the same
level as the outer surface of the nut, the
brakes are worn out and should be
overhauled.
D
DD
D Check the tightening torques of power train flanges and bolts
Tightening torques (dry)
UNF 3/8 45 Nm...................
Wheel nuts 610 Nm.................
Axle fastening nuts 1000 Nm..........
Axle fastening lock nuts 500 Nm......
D
DD
D Change brake system high--p ressure o il filter element
Maintenance
Manual
Maintenance
Manual
Operator's
Manual
Operator's
Manual
Maintenance
Manual
Maintenance
Manual
Workshop
Manual
Workshop
Manual
Spare Part
Manual
Spare Part
Manual
To Next Page
Loading...