37 (64)
MAINTENANCE OPERATIONS
TKU--- C 01140--- 1 EN 0404
D
DD
D Change transmission oil filter
Clean the filter adapter.
Add quantity necessary to bring fluid level
to FULL mark on dipstick.
D
DD
D Change return oil filter element for b u cket and steering hydraulics
D
DD
D Check center articulation with dial g au g e
Place a dial gauge with a magnetic stand
on the upper hinge plate of the front frame.
Press the bucket against the
ground so that the front frame
rises from the ground and so
you may observe the readings
of the dial gauge.
The reading should be
0.2...0.4 mm.
If the play is smaller or larger, use shims to
adjust it.
For further information, consult the workshop
manual.
Maintenance
Manual
Maintenance
Manual
Operator's
Manual
Operator's
Manual
Maintenance
Manual
Maintenance
Manual
Workshop
Manual
Workshop
Manual
Spare Part
Manual
Spare Part
Manual
To Next Page
Loading...