Toro 03672 - Adjusting the Tire Pressure; Adjusting the Step Height; Adjusting the Control Arm Position

1
AdjustingtheTirePressure
NoPartsRequired
Procedure
Thetiresareover-inatedforshipping.Therefore,
releasesomeoftheairtoreducethepressure.
Correctairpressureinthefrontandreartiresis83
to103kPa(12to15psi).
Important:Maintainevenpressureinalltiresto
ensureuniformcontactwiththeturf.
2
AdjustingtheStepHeight
NoPartsRequired
Procedure
Theheightofthestepscanbeadjustedforthe
operatorscomfort.
1.Removethe2boltsandnutssecuringthestep
bracketstothetractionunitframe(Figure2)
g003959
Figure2
1.Step2.Stepbrackets
2.Raiseorlowerthesteptothedesiredheight
andre-securethebracketstotheframewiththe
2boltsandnuts.
3.Repeattheprocedureontheotherstep.
3
AdjustingtheControlArm
Position
NoPartsRequired
Procedure
Thecontrolarmpositioncanbeadjustedforthe
operatorscomfort.
1.Loosenthe2boltssecuringthecontrolarmto
theretainingbracket(Figure3).
g004152
Figure3
1.Controlarm
3.Bolts(2)
2.Retainingbrackets
2.Rotatethecontrolarmtothedesiredposition
andtightenthe2bolts.
13