Toro 03672 - Replacing the Hydraulic Filters

9.Checkthelevelofthehydraulicuidandadd
enoughtoraiseleveltotheFullmarkonthe
dipstick.
Important:Donotover-ll.
ReplacingtheHydraulic
Filters
Thehydraulicsystemisequippedwithaservice
intervalindicator(Figure87).Withtheenginerunning
atoperatingtemperature,viewtheindicator,itshould
beintheGreenzone.Whentheindicatorisinthe
Redzone,changethehydrauliclters.
g004132
Figure87
1.Hydrauliclterrestrictionindicator
Important:Useofanyotherltersmayvoidthe
warrantyonsomecomponents.
1.Positionthemachineonalevelsurface,lower
thecuttingunits,stoptheengine,engagethe
parkingbrake,andremovethekeyfromthe
ignitionswitch.
2.Cleantheareaaroundtheltermountingarea
andplaceadrainpanunderlter(Figure88)
and(Figure89).
g021271
Figure88
1.Hydrauliclter
g004150
Figure89
1.Hydrauliclter
3.Removethelter.
4.Lubricatethegasketonthenewlterwith
hydraulicoil.
5.Ensurethattheltermountingareaisclean.
6.Installthelterbyhanduntilthegasketcontacts
themountingsurface,thenrotateitanadditional
1/2turn.
7.Repeattheprocedureontheotherlter.
8.Starttheengineandletitrunforabouttwo
minutestopurgeairfromthesystem.
9.Stoptheengineandcheckforleaks.
56