Overview of the InfoCenter Display (continued)
Settings
Menu Item Description
Units Controls the units used on the display. The
menu choices are English or Metric.
Language Controls the language used on the display*.
LCD Backlight Controls the brightness of the LCD display.
LCD Contrast Controls the contrast of the LCD display.
Front Backlap Reel Speed Controls the speed of the front reels in backlap
mode.
Rear Backlap Reel Speed Controls the speed of the rear reels in backlap
mode.
Protected Menus Allows a person (superintendent/mechanic)
authorized by your company with the PIN code
to access protected menus.
Auto Idle Controls the amount of time allowed before
returning the engine to low idle when the
machine is stationary
Blade Count Controls the number of blades on the reel for
reel speed.
Height of cut (HOC) Controls the height of cut (HOC) for determining
the reel speed.
F Reel RPM Displays the calculated reel speed position for
the front reels. The reels can also be manually
adjusted.
R Reel RPM Displays the calculated reel speed position for
the rear reels. The reels can also be manually
adjusted.
Mow Speed Controls the ground speed for determining the
reel speed
* Only "operator-faced" text is translated. Faults, Service, and Diagnostics screens are
"service-faced". Titles are be in the selected language, but menu items are in English.
Protected under Protected Menus—accessible only by entering PIN
About
Menu Item Description
Model Lists the model number of the machine.
SN Lists the serial number of the machine.
Machine Controller Revision Lists the software revision of the master
controller.
3466-702A Page 5–9 Operation: Before Operation
To Next Page
Loading...
Need help?
General
