Diesel Particulate Filter Regeneration (continued)
G448003
Note: If Inhibit Regen is set to ON, the InfoCenter
shows Advisory #185. Press the right button to
set inhibit regeneration setting to O
FF and continue
with the reset regeneration.
G448004
Note: If the InfoCenter shows Advisory #186,
set the engine to full throttle (high idle) to allow the
reset regeneration to continue.
Note: When the reset regeneration completes, the high exhaust-temperature icon
disappears from the InfoCenter.
Parked or Recovery Regeneration
• When the engine computer requests either a parked regeneration or a recovery
regeneration, the regeneration request icon shows in the InfoCenter.
• The machine does not automatically perform a parked regeneration or a recovery
regeneration, you must run the regeneration through the InfoCenter.
Parked Regeneration Messages
When a parked regeneration is requested by the engine computer the following messages
show in the InfoCenter:
G448005
• Engine warning SPN 3720, FMI 16
G448007
• Advisory #188 Parked regeneration
required
Note: Advisory #188 displays every 15
minutes.
3466-702A Page 5–29 Operation: During Operation
To Next Page
Loading...
Need help?
General
