Toro 07413LT - Monitoring the Battery-System Charge Level; Stopping the Machine

ClosingtheTailgate
Ifyouunloadedloosematerialsuchassand,
landscapingrock,orwoodchipsfromthecargobedof
themachine,someofthematerialthatyouunloaded
mayhavelodgedinthehingeareaofthetailgate.
Performthefollowingstepsbeforeclosingthetailgate.
1.Useyourhandstoremoveasmuchofthe
materialfromthehingeareaaspossible.
2.Rotatethetailgatetoapproximatelythe45°
position(Figure23).
g034023
Figure23
1.Rotatethetailgateback
andforthseveraltimes.
3.Hingearea
2.Rotatethetailgateto
approximatelythe45°
position.
3.Useashort,shakingmotiontorotatethetailgate
backandforthseveraltimes(Figure23).
Note:Thisactionhelpsmovematerialaway
fromthehingearea.
4.Lowerthetailgateandcheckformaterial
remaininginthehingearea.
5.Repeatsteps1through4untilthematerialis
removedfromthehingearea.
6.Rotatethetailgateupandliftthetailgateintothe
notchesinthecargobed.
Monitoringthe
Battery-SystemCharge
Level
Refertothedisplaytodeterminethebattery-system
chargelevel;refertoDisplay(page12).
UnderstandingtheLow
Battery-LevelAdvisories
Ifthebatterylevelbecomestoolow(i.e.,below5%),
alow-batteryadvisoryappearsonthedisplay.When
youareoperatingatthisbatterypercentage,drivethe
machinetoadesignatedbattery-chargingareaand
chargethebatteries;refertoChargingtheLithium-Ion
Batteries(page27).
StoppingtheMachine
Important:Whenstoppingthemachineon
anincline,usetheservicebrakestostopthe
machineandengagetheparkingbraketoholdthe
machineinplace.Usingtheacceleratortostall
themachineonthehillcanoverheatthemotoror
drainthebatteries.
1.Removeyourfootfromtheacceleratorpedal.
2.Slowlypressthebrakepedaltoapplytheservice
brakesuntilthemachinecomestoacomplete
stop.
Note:Thestoppingdistancemayvary
dependingonthemachineloadandspeed.
21