Toro 07413LT - Checking the Fluid Levels and Tire Pressure; Burnishing the Brakes; Reading the Manual and Viewing the Setup Material

4.Use3screwstosecurethewheelcovertothe
steeringwheel.
5.Torquethe3screwsto0.6N∙m(5in-lb).
g424447
Figure4
2
CheckingtheFluidLevels
andTirePressure
NoPartsRequired
Procedure
1.Ensurethatthebatteriesarecharged;referto
ChargingtheLithium-IonBatteries(page27).
2.Checkthebrake-uidlevelbeforeyouoperate
themachine;refertoCheckingtheBrake-Fluid
Level(page44).
3.Checktheairpressureinthetires;referto
CheckingtheTirePressure(page16).
3
BurnishingtheBrakes
NoPartsRequired
Procedure
Toensureoptimumperformanceofthebrakesystem,
burnish(break-in)thebrakesbeforeuse.
1.Bringthemachineuptofullspeed,applythe
brakestorapidlystopthemachinewithout
lockingupthetires.
2.Repeatthisprocedure10times,waiting1minute
betweenstops,toavoidoverheatingthebrakes.
Important:Thisprocedureismosteffective
ifthemachineisloadedwith227kg(500lb).
4
ReadingtheManualand
ViewingtheSetupMaterial
Partsneededforthisprocedure:
1
Operator'sManual
1Registrationcard
1PredeliveryInspectionForm
1
CerticateofQuality
2Key
Procedure
•ReadtheOperator'sManual.
•Fillouttheregistrationcard.
•CompletethePredeliveryInspectionForm.
•ReviewtheCerticateofQuality.
8