Toro 07413LT - Installing a Bench Cushion; Lubrication; Greasing the Front Wheel Bearings

g237191
Figure33
InstallingaBenchCushion
Slidethebenchcushionontothepinsandlowerthe
cushion(Figure34).
g237190
Figure34
Lubrication
GreasingtheFrontWheel
Bearings
ServiceInterval:Every300hours
Greasespecication:MobilgreaseXHP™-222
RemovingtheHubandRotor
1.Liftthefrontofthemachineandsupportitwith
jackstands.
2.Removethe4lugnutsthatsecurethewheel
tothehub(Figure35).
g321364
Figure35
1.Hub3.Lugnut
2.Wheel
3.Removetheange-headbolts(3/8x3/4inch)
thatsecurethebracketforthebrakeassembly
tothespindleandseparatethebrakefromthe
spindle(Figure36).
Note:Supportthebrakeassemblybefore
proceedingtothenextstep.
33