Toro 20068 - Initial Setup Procedures; Installing the Blade Control Bar; Unfolding and Securing the Handle; Filling the Engine with Oil

Setup
Important:Removeanddiscardtheprotective
plasticsheetthatcoverstheengine.
1.InstallingtheBladeControl
Bar
Procedure
Installthebladecontrolbarintotheupperhandle
(
Figure3).
Figure3
2.UnfoldingtheHandle
Procedure
Foldingorunfoldingthehandleimproperlycan
damagethecables,causinganunsafeoperating
condition.
•Donotdamagethecableswhenfoldingor
unfoldingthehandle.
•Ifacableisdamaged,contactanAuthorized
ServiceDealer.
1.Carefullymovetheupperhandleforwarduntilthe
handlehalvesareinlineandnesttogetherasshown
(Figure4).
Figure4
2.Tightenthehandleknobs(Figure5).
Figure5
3.Rotatethehandlerearward(asshown)untilitclicks
intoplace(Figure6).
Figure6
3.FillingtheEnginewithOil
Procedure
Yourmowerdoesnotcomewithoilintheengine,butit
doescomewithabottleofoil.
1.Removethedipstick(Figure7).
6