Toro 21357 - Page 20

AdjustingtheSelf-Propel
Drive
Wheneveryouinstallanewself-propelcableorif
theself-propeldriveisoutofadjustment,adjustthe
self-propeldrivecable.
1.Loosenthecable-supportnut(Figure21).
g009692
Figure21
1.25to38mm(1to1-1/2
inches)
4.Cable-supportnut
2.Self-propel-drivebar5.Cablesupport
3.Cablejacket
2.Holdtheself-propel-drivebar25to38mm(1to
1-1/2inches)fromthehandle(Figure21).
3.Pulldownthecablejacket(towardthemachine)
untilthereisnoslackinthecable(Figure21).
4.Tightenthenutonthecablesupport.
5.Releasetheself-propel-drivebarandensure
thatthecableisloose.
Note:Thecablemustbeloosewiththe
self-propeldrivebarinthereleasedposition;
otherwise,themachinemaycreepwhenyou
disengagethebar.
PreparingtheBatteryPack
forRecycling
Important:Uponremoval,covertheterminalsof
thebatterypackwithheavy-dutyadhesivetape.
Donotattempttodestroyordisassemblethe
batterypackorremoveanyofitscomponents.
Lithium-ionbatterypackslabeledwiththe
Call2Recyclesealcanberecycledatany
participatingretailerorbatteryrecycling
facilityintheCall2Recycleprogram(US
andCanadaonly).T olocateaparticipating
retailerorfacilityclosesttoyou,pleasecall
1-800-822-8837orvisitwww.call2recycle.org.
Ifyoucannotlocateaparticipatingretaileror
facilitynearby,orifyourrechargeablebattery
isnotlabeledwiththeCall2Recycleseal,
pleasecontactyourlocalmunicipalityformore
informationonhowtoresponsiblyrecyclethe
battery.IfyouarelocatedoutsideoftheUS
andCanada,pleasecontactyourauthorized
Torodistributor.
20