Assembly
18
Mount Fuel Tank
1. Align fuel tank to top of rear frame and secure
fuel tank right side with (2) 5/16–18 x 7/8 in.
(22.5 mm) bolts, (2) 5/16 lock washers and (2)
5/16 washers (Fig. 10).
2. Torque bolts to 10 ft. lbs. (13 N•m).
3. Secure fuel tank left side to frame with (2)
5/16–18 x 7/8 in. (22.5 mm) studs, (2) 5/16
washers, (2) springs and (2) 5/16 locknuts
(Fig. 10).
4. Tighten nuts until stud threads appear just below
nut.
m–37711
2
3
5
4
6
3
Figure 10
1. Bolt 5/8–18 x 7/8”
(22.5 mm)
2. Lock washer 5/16
3. Washer 5/16
4. Stud
5. Spring
6. Locknut
5. Push fuel line onto fuel tank fitting and secure
with hose clamp (Fig. 11).
m–3778
1
23
Figure 11
1. Fuel line
2. Hose clamp
3. Fuel fitting
To Next Page
Loading...
