Toro 30344 - Using the Hardware for Attachments

CuttingDeckWeight-TransferPressure
52inchSideDischargeDeck
(Model30555)
827kPa(120psi)
60inchSideDischargeDeck
(Model30366)or62inBase
Deck(Model30403)or62in
SideDischargeDeck(Model
30551)
1620kPa(235psi)
72inchSideDischargeDeck
(Model31336)or72inBase
Deck(Model30404)or72
inGuardianRecyclerDeck
(Model31335)
1930kPa(280psi)
8.Shutofftheengine.
9.Tightenthejamnutatthebottomofthe
weight-transferspool,andtorquethenutto
13-16N∙m(10-12ft-lb).
10.Removethepressuregaugefromthetestport.
12
UsingtheHardwarefor
Attachments
Partsneededforthisprocedure:
1Rollpin
2
Bolt(5/16x1-3/4inches)
2
Locknut(5/16inch)
2
Cylinderpin
4
Cotterpin(3/16x1-1/2inches)
2Brake-returnsprings
Procedure
1.Savetherollpin,bolts(5/16x1-3/4inches),and
locknuts(5/16inch)tosecuretheuniversalshaft
toanimplement.
2.Savethecylinderpinandcotterpin(3/16x1-1/2
inches)tosecurethedeckliftarmstothelift
cylinder.
3.Savethebrakereturnspringstomountthedeck
liftarms.
19