Toro 31230N - Adjusting the Mow Speed Limiter Lever

Figure40
1.Tractionpedal
3.0.060inch(1.5mm)
2.Stopboltw/jamnut
(forward)
4.Stopboltw/jamnut
(reverse)
4.Adjustthestopboltallthewayin(awayfromthe
tractionpedal).
5.Usingyourhand,pushthetractionpedalalltheway
forward,withlightpressure,untilitstopsandholdit
there.Maintainonlylightpressureonthepedalwhen
pushingittothefullforwardposition.
6.Withtheseatintheraisedposition,verifythatyou
arenotoverloadingthelinkagebymakingsure
thetransmissiondoesnotmovewhenthepedalis
depressedtothestop.
7.Adjustthestopboltout(towardsthetractionpedal)
untilthereisagapof1.5mm(0.060inch)betweenthe
headofthestopboltandthebottomofthetraction
pedal.
8.Tightenthejamnuttosecurethestopboltinplace.
9.Thereversestopboltmaybeadjustedifthemaximum
reversespeedisnotacceptable.Forafasterreverse
speed,adjustthestopboltin.Foraslowerreverse
speed,adjustthestopboltout.
AdjustingtheMowSpeed
LimiterLever
Themowspeedlimiterlever(Figure41)canbeipped
forwardtolimitthetractionspeedwhileoperating.
1.DisengagethePTO,releasethetractionpedaltothe
neutralpositionandsettheparkingbrake.
2.MovethethrottlelevertotheSlowposition,stopthe
engine,removethekey,andwaitforallmovingpartsto
stopbeforeleavingtheoperatingposition.
3.Loosenthejamnutonthemowspeedlimiterstopbolt
(
Figure41).
Figure41
1.Mowspeedlimiterlever
2.Stopboltw/jamnut
4.Threadthestopboltintoincreasethemowspeedand
outtodecreasethemowspeed.
5.Tightenthejamnuttolocktheadjustment.
6.Rotatethemowspeedlimiterleverdown,operatethe
machinetoverifytheadjustmentandreadjustthestop
boltasrequired.
40