Toro 31950 - Routing and Connecting Wire Harness; Harness Routing at Axle-Frame Tube

5
RoutingandConnecting
theWireHarness
Partsneededforthisprocedure:
4
Cableties
RoutingandConnectingthe
HarnessattheAxle-FrameTube
1.Routethe7-contactconnectorofthewire
harnessalongtherightframetubeasshownin
Figure9.
g280324
Figure9
1.Electrical
connectors—TAILLIGHT
(RIGHT)andTAILLIGHT
(LEFT)(wireharness)
2.7-contactconnector(wire
harness)
2.Attheforwardsideoftheaxle-frametube,plug
the4-pinconnectorofthelefttaillightharness
(Figure10)intothe4-socketconnectorofthe
wireharnesslabeledTAILLIGHT(LEFT).
g280316
Figure10
1.Holes—axle-frametube6
mm(1/4inch)
5.Push-infastener(harness)
2.Wireharness6.4-socketconnector—wire
harnessTAILLIGHT(LEFT)
3.4-pinconnector(right
taillightharness)
7.4-pinconnector(left
taillightharness)
4.4-socketconnector—wire
harnessTAILLIGHT(RIGHT)
3.Plugthe4-pinconnectoroftherighttaillight
harness(Figure10)intothe4-socketconnector
ofthewireharnesslabeledTAILLIGHT(RIGHT).
4.Atthe4-socketconnectorslabeledTAILLIGHT
(LEFT)andTAILLIGHT(LEFT),inserttheharness
push-infastenersintothe2holes6mm(1/4
inch)inthefrontoftheaxle-frametube(Figure
10).
6