Toro 33518 - Slope Indicator

To Next Page

To Previous Page

SlopeIndicator

G01 1841

g011841

Figure3

Thispagemaybecopiedforpersonaluse.

1.Themaximumslopeyoucansafelyoperatethemachineonis15degrees.Usetheslopecharttodeterminethedegreeofslope

ofhillsbeforeoperating.Donotoperatethismachineonaslopegreaterthan15degrees.Foldalongtheappropriateline

tomatchtherecommendedslope.

2.Alignthisedgewithaverticalsurface,atree,building,fencepole,etc.

3.Exampleofhowtocompareslopewithfoldededge

Main Page

Table of Contents3
Safety4
Safe Operating Practices4
Aerator Safety6
Slope Indicator7
Safety and Instructional Decals8
Setup12
Checking Tire Pressure12
Servicing the Battery12
Servicing the Engine Oil13
Servicing the Transmission Fluid14
Servicing the Auxiliary Hydraulic Fluid14
Removing the Cylinder Stop15
Product Overview16
Controls16
Specifications19
Operation19
Checking the Engine-Oil Level19
Adding Fuel20
Lubricating the Chains22
Checking the Safety-Interlock System23
Checking for Loose Hardware23
Operating the Machine23
Transporting the Machine26
Maintenance28
Recommended Maintenance Schedule(S)28
Pre-Maintenance Procedures29
Preparing for the Machine for Maintenance29
Accessing the Console Compartment29
Lubrication30
Lubricating the Grease Fittings30
Lubricating the Casters31
Engine Maintenance33
Servicing the Air Cleaner33
Servicing the Engine Oil34
Servicing the Spark Plug36
Checking the Spark Arrester37
Fuel System Maintenance37
Servicing the Fuel Filter37
Electrical System Maintenance38
Servicing the Battery38
Servicing the Fuses40
Drive System Maintenance41
Checking the Air Pressure in the Tires41
Checking the Wheel Hub Nuts41
Checking the Torque of the Wheel Lug Nuts41
Adjusting the Caster Pivot Bearings Pre-Load41
Maintaining the Chain41
Checking the Torque of the Transmission Output Shaft Nut43
Brake Maintenance43
Adjusting the Parking Brake43
Adjusting the Brake Switch44
Belt Maintenance44
Checking the Condition and Tension of the Belts44
Adjusting the Auxiliary Pump-Drive Belt44
Replacing the Transmission-Drive Belt45
Controls System Maintenance46
Adjusting the Traction-Control Linkage46
Hydraulic System Maintenance47
Maintaining the Auxiliary Hydraulic System47
Maintaining the Transmission48
Tine Maintenance51
Checking the Tines51
Adjusting the Tine Drive Chain51
Cleaning52
Cleaning the Engine and the Exhaust System Area52
Removing the Engine Shrouds and Cleaning the Cooling Fins52
Cleaning the Debris from the Machine52
Waste Disposal52
Storage53
Troubleshooting54
Schematics56

Toro 33518 - Slope Indicator

Table of Contents

Other manuals for Toro 33518

Related product manuals