To Next PageTo Next Page
Need help?Do you have a question about the Toro 37805 and is the answer not in the manual?
General| Brand | Toro |
|---|---|
| Model | 37805 |
| Category | Snow Blower |
| Language | English |
Identifies hazards that may cause serious injury or death if precautions are not followed.
Instructions for operating the machine at altitudes above 1500m (5,000 ft) and the use of a High Altitude Kit.
General safety instructions and warnings for operating the snowthrower.
Explains the importance and location of safety decals on the machine.
Step-by-step instructions for installing the discharge chute onto the snowthrower.
Procedure for unfolding and setting up the upper handle of the snowthrower.
Instructions for connecting the traction control linkage to the machine.
Steps for installing the rod that controls the discharge chute direction.
Instructions on how to install the snow-cleanout tool.
Procedures for checking engine oil, tire pressure, and adjusting skids/scraper.
Verifying that the traction drive system is functioning correctly.
Labeled diagram identifying major parts of the snowthrower.
Labeled diagram identifying main controls on the snowthrower.
Crucial safety checks and precautions to take before starting the machine.
General safety guidelines for operating the snowthrower, including clothing and area inspection.
Important safety information regarding fuel handling, storage, and usage.
How to operate the snowthrower in freewheel or self-propel mode.
Instructions and guidelines for safely filling the fuel tank.
Detailed instructions for starting the engine using the electric starter system.
Step-by-step guide for starting the engine using the recoil starter.
How to engage and disengage the drive system that moves the machine.
Guide to changing between the 6 forward and 2 reverse speed settings.
How to engage and disengage the auger and impeller rotation.
Instructions for using the Quick Stick control for chute and deflector adjustments.
Methods for safely clearing obstructions from the discharge chute.
Safety measures to take after finishing operation, including engine cooldown.
Steps to prevent snowthrower components from freezing after use in cold conditions.
A schedule outlining maintenance tasks based on service intervals.
Essential safety precautions to observe before performing any maintenance.
Steps to take before starting any maintenance procedure on the machine.
How to check and adjust the skids and scraper for proper snowthrower function.
Detailed steps for checking and maintaining the correct engine oil level.
Procedures for inspecting and adjusting the traction control cable for proper operation.
Steps to inspect and adjust the cable that controls the auger and impeller.
Guide to checking the oil level in the auger gearbox and adding oil if needed.
Instructions for draining old oil and refilling the engine with new oil.
Yearly lubrication procedure for the hex shaft using engine oil.
Steps for removing the old spark plug and installing a new one.
How to adjust the latch that secures the discharge chute position.
Information on when and how to replace worn or damaged drive belts.
Instructions for replacing the headlight assembly on the snowthrower.
Safety precautions to follow when storing the snowthrower.
Detailed steps for preparing and storing the snowthrower for extended periods.
