Need help?Do you have a question about the Toro 38062 and is the answer not in the manual?
General| Model | 38062 |
|---|---|
| Type | Two-Stage |
| Clearing Width | 24 inches |
| Throw Distance | Up to 40 feet |
| Starting System | Electric Start |
| Intake Height | 20 inches |
| Auger Material | Steel |
| Engine | Toro Premium 212cc 4-cycle OHV |
Enter product model and serial numbers for service.
Explains DANGER, WARNING, CAUTION signal words for hazards.
Essential steps to follow before starting the snowthrower.
Instructions for attaching the snowthrower handles.
Guide for installing the speed selector rod.
Steps to install the traction control rod.
Steps for connecting the auger/impeller drive controls.
Instructions for installing the chute control rod.
How to attach and secure the chute deflector.
Instructions for setting correct tire pressure.
Procedure for adding engine oil before operation.
How to safely add gasoline to the fuel tank.
Explanation of the snowthrower's various controls.
Procedures for starting and stopping the snowthrower engine.
Steps to safely drain gasoline from the fuel tank.
Guide for lubricating moving parts every 15 hours.
Instructions for changing engine oil initially and periodically.
How to check and add grease to the auger gear box.
Steps for adjusting or replacing the auger/impeller belt.
Detailed instructions for replacing the auger/impeller belt.
Steps for replacing the traction drive belt.
How to adjust the snowthrower's traction drive system.
Guide for adjusting the speed selector linkage for proper gear engagement.
Instructions for inspecting and replacing the spark plug.
Steps for preparing the snowthrower for long-term storage.
To Next Page
