What to do if my Toro Blower has a lack of adequate air flow?
If your Toro Blower lacks adequate airflow, first check if the air slots are clogged with debris and clean them out. If the slots are clear, ensure the PTO speed is at 540 rpm. Also, verify the throttle on the tractor engine is not too slow; make any necessary repairs to bring the tractor speed up to normal.
Why is there excessive vibration in my Toro Blower?
Excessive vibration in your Toro Blower can stem from several causes. First, the bearing(s) on the fan shaft might be damaged, requiring replacement. Second, material buildup on the fan blades can cause imbalance; clean the inside of the housing to remove any buildup. Finally, ensure the PTO speed is not too fast; reduce it to 540 rpm if necessary.
General| Model | 44536 |
|---|---|
| Power Source | Gas |
| Air Speed | 235 mph |
| Air Volume | 450 CFM |
| Weight | 8.7 lbs |
| Variable Speed | Yes |
| Engine Type | 2-Cycle |
| Type | Handheld Blower |
| Noise Level | 70 dB |
To Next Page