Toro 570Z Series - Maxijet Microspray Nozzle Information; Maxijet Nozzle Features and Specifications

5
5
• Low-flow rates reduce runoff
in compacted soils and allows
deep percolation in sandy soils
• Nozzles and pressure-
compensating screens are
color-coded by flow rate for
easy identification
• Three radii and flow rates:
• 10 GPH—4', blue
(40 LPH—1,2m)
• 15 GPH—5', green
(57 LPH—1,5m)
• 24 GPH—6', red
(91 LPH—1,8m)
• Four nozzle patterns:
• 90° quarter-circle
• 180° half-circle
• 360° full-circle
• Center strip
Maxijet
®
Microspray
Nozzles
Features
• Ideal for ground cover,
flowerbeds and low-water-use
plants
• Nozzle, adapter and pressure-
compensating screens are
pre-assembled
• Pressure compensation
provides uniform application
over elevation changes and
long runs
• Flushmount Top-Hat
design allows the nozzle
assembly to retract into the
body (on pop-up models)
for added debris and
vandal resistance
Specifications
• Flow rate: 10–31.6 GPH
(40–119,6 LPH)
• Recommended operating
range: 20–50 psi (1,4–3,5 Bar)
• Maximum operating pressure:
50 psi (3,5 Bar)
Note: To specify a Maxijet nozzle with a 570Z sprinkler body, attach the body
specification (pgs. 2-4) before the above nozzle specification.
Maxijet is a registered trademark of The Toro Company.
MJ X
XXX
Description Radius Arc
MJ—Maxijet Microspray 4—4' (1,2m) Q—90° F—360°
Nozzle Assemblies 5—5' (1,5m) H—180° CST—Center Strip
6—6' (1,8m)
Example: A 4' (1,2m) radius Maxijet Microspray Nozzle Assembly
with a 180° arc, would be specified as:
MJ-4H
Specifying Information
6' 5' 4' 6' 5' 4'
10 GPH Series
with 0° Trajectory—U.S. ●
Pattern Description psi GPH Radius
MJ-4Q 20 10.5 4.5
30 12.8 5.0
40 14.6 5.5
MJ-4Q-PC 20-50 10.0 4.5
MJ-4H 20 10.5 4.0
30 12.8 4.5
40 14.6 4.5
MJ-4H-PC 20-50 10.0 4.0
MJ-4F 20 10.5 4.0
30 12.8 5.0
40 14.6 5.0
MJ-4F-PC 20-50 10.0 3.5
MJ-4CST 20 10.5 1.5 x 3
30 12.8 5.5 x 3
40 14.6 6.0 x 3.5
MJ-4CST-PC 20-50 10.0 4 x 3
15 GPH Series
with 0° Trajectory—U.S. ●
Pattern Description psi GPH Radius
MJ-5Q 20 16.0 6.5
30 19.9 7.0
40 22.7 7.5
MJ-5Q-PC 20-50 15.0 5.5
MJ-5H 20 16.0 6.5
30 19.9 7.0
40 22.7 7.5
MJ-5H-PC 20-50 15.0 5.5
MJ-5F 20 16.0 4.5
30 19,9 5.0
40 22.7 5.0
MJ-5F-PC 20-50 15.0 5.0
MJ-5CST 20 16.0 4.5 x 3
30 19.9 5.5 x 3
40 22.7 6.5 x 3.5
MJ-5CST-PC 20-50 15.0 5 x 3
24 GPH Series
with 0° Trajectory—U.S. ●
Pattern Description psi GPH Radius
MJ-6Q 20 23.5 7.0
30 29.1 8.0
40 31.6 8.5
MJ-6Q-PC 20-50 24.0 6.5
MJ-6H 20 23.5 5.0
30 29.1 5.5
40 31.6 6.0
MJ-6H-PC 20-50 24.0 5.5
MJ-6F 20 23.5 5.0
30 29.1 6.5
40 31.6 7.5
MJ-6F-PC 20-50 24.0 5.5
MJ-6CST 20 23.5 5.5 x 3
30 29.1 6.5 x 3.5
40 31.6 7.0 x 3.5
MJ-6CST-PC 20-50 24.0 6 x 3
Radius shown in feet.
570Z Series Maxijet Nozzle Assemblies Performance Data