• 5' (1,5m) nozzles adjust
to 3' (1m)
• Standard and special spray
patterns
• Patterns for small areas:
• Full set of arcs for 10' (3m),
8' (2,4m) and 5' (1,5m) radius
nozzles
• 4' x 18' (1,2 x 5,5m) side strip
ideal for medians
• 2' x 6' (0,6 x 1,8m) for small
planter beds and other
narrow areas
• Five levels of trajectory
• Convenient nozzle packaging—
nozzles and screens packed
separately in attached bags
• Fine-mesh, snap-in filter
screens, prevent clogging of
lower gallonage nozzles
• Adjustment screw allows up to
25% reduction in radius and
complete shutoff
Specifications
• Flow rate: 0.05–4.58 GPM
(0,2–17 LPM)
• Recommended operating
pressure range: 20–50 psi
(1,4–3,5 Bar)
• Maximum operating pressure:
75 psi (5,2 Bar)
570Z MPR Plus
Spray Nozzles
Features
• Matched precipitation rates
ensure all nozzles (every radius
and pattern) apply water at
approximately the same rate
• Low-flow rates allow for more
sprinklers to be placed on the
same zone
• Free preinstalled PCDs
eliminate fogging, conserve
water and provide precise
flow rates (also available
without PCDs)
• Color-coding by radius for
easy identification
• Complete selection of arcs for
all radius options—full,
3
⁄4,
2
⁄3,
1
⁄2,
1
⁄3 and
1
⁄4
• Precise radius/flow adjustment
will not lose adjustment
Radius adjustment
screw provides 25%
radius reduction and
complete shutoff
Threaded to fit any Toro
570 pop-up body, riser,
extender or adapter
Free pressure-compensating
device maintains
constant performance
Color-coded band to
indicate radius
Molded-in opening
to ensure true matched
precipitation rates
Radius Arc Optional
5—5' (1,5m) Q—90
°
F—360
°
PC—Pressure
8—8' (2,4m) T—120
°
EST—End Strip Compensation
10—10' (3,0m) H—180
°
CST—Center Strip
12—12' (3,7m) TT—240
°
SST—Side Strip
15—15' (4,6m) TQ—270
°
Example: A 570 MPR Plus Nozzle with a spray of 10' (3m), 180
°
arc
and pressure compensation, would be specified as: 10-H-PC
Specifying Information
XX PCXXX
Note: To specify an MPR Plus nozzle with a 570Z sprinkler body, attach the body
specification (pgs. 2–4)) before the above nozzle specification.
5'
8' 12'
10' 15'
Special
Patterns
White Red Red and Metal
15' (4,6m) Series
8'
5' (1,5m) Series
(2,4m) Series
12' (3,7m) Series
4' x 30' SST 2' x 6'
(1,2 x 9,1m) (0,6 x 1,8m) SST
10' (3m) Series
4' x 18' SST
10
°
Stream Spray Series
(1,2 x 5,5m)
4' x 30' (1,2 x 9,1m) CST 35
°
Stream Spray Series
Stream Bubblers Flood Bubbler Series
Flat-Spray Flat-Spray, Low
(Non-MPR) Gallonage (Non-MPR)
4' x 30' (1,2 x 9,1m) EST
9' x 18' (2,7 x 5,5m) SST
Note: Screens provided with nozzle.
Refer to current Parts Breakout Book, (Form No. 368-0044) for more information.
Nozzle Screens
Apex at 30 psi (2 Bar)
Nozzle Series 27° 23° 12° 5° 0°
15' (6m) 4' 8" (1,4m)
12' (3,7m) 3' 7" (1,1m)
10' (3m) 2' 4" (0,7m)
8' (2,4m) 2' 2" (0,66m)
5' (1,5m) 1' 6" (0,46m)
Maximum Height of Spray
6
6
To Next Page
Loading...
