Toro 74253 - Drive System Maintenance; Adjusting the Tracking

Figure45
1.Fan-30amp4.Ignition-30amp
2.Engine-10amp
5.Leftsideofmachine
3.Optionalaccessory
DriveSystem
Maintenance
AdjustingtheTracking
Themachinehasaknobforadjustingthetracking
locatedundertheseat.
Important:Adjustthehandleneutralandhydraulic
pumpneutralbeforeadjustingthetracking.Refer
toAdjustingtheHandleNeutralinControlsSystem
Maintenance,page45andAdjustingtheHydraulic
PumpNeutralinHydraulicSystemMaintenance,
page46.
1.Pushbothcontrolleversforwardthesamedistance.
2.Checkifthemachinepullstooneside.Ifitdoes,
stopthemachineandsettheparkingbrake.
3.Unlatchtheseatandtilttheseatforwardtoaccess
thetrackingknob.
Note:Determinetheleftandrightsidesofthe
machinefromthenormaloperatingposition.
4.Tomakethemachinegoright,turntheknobtowards
therightsideofthemachine.RefertoFigure46.
5.Tomakethemachinegoleft,turntheknobtowards
theleftsideofthemachine.RefertoFigure46.
6.Repeatadjustmentuntilthetrackingiscorrect.
37