Figure 46
Figure 47
5. If the ends of the lev ers hit ag ainst eac h other ,
adjust the lev ers b y rotating them out to the
neutral loc k ed position and carefully bend
them outw ard. R e peat this ste p as needed.
Adjusting the Tracking
1. If the mac hine tur ns right or left when the
handles are pushed forw ard tog ether , adjust
the stop on the side opposite that the mac hine
tur ns .
2. Loosen the bolt located in front of the control
lev er .
3. Mo v e the stop until the mac hine dri v es straight
( Figure 48 ).
4. Tighten the bolt located in front of the control
lev er ( Figure 48 ).
Figure 48
1. Control lever 3. Bolt in front of the control
lever
2. Stop
Hydraulic System
Maintenance
Servicing the Hydraulic
System
Checking the Hydraulic Fluid
Fluid T ype: Mobil 1 15W -50 synthetic motor oil or
equi v alent synthetic oil.
Important: Use oil specified or equi v alent.
Other fluids could cause system dama ge.
Chec k the h y draulic fluid lev el:
• Before the engine is first star ted.
37
To Next Page
Loading...
