Toro 74408TE - Page 10

112-3854
1. Pull tow bypass levers
rearward and then out to
lock into place.
2. Push the machine.
112-3855
1. Height of cut—mm 3. Locking pin location.
2. Locked position
112-3856
1. Warning—read the Operator’s Manual for more information.
2. Poison hazard; caustic liquid/chemical burn hazard—keep
children away from the battery.
3. Explosion hazard—no re, open ames, or smoking; avoid
sparks.
112-3857
1. Warning—read the Operator’s Manual .
2. Cutting/dismemberment hazard, fan and entanglement
hazard, belt—stay away from moving parts.
112-3858
1. Read the Operator’s
Manual .
3. Remove the ignition key
before adjusting the height
of cut.
2. Read the instructions before
servicing or performing
maintenance.
4. Height of cut settings.
Manufacturer’s Mark
1. Indicates the blade is identied as a part from the original
machine manufacturer.
10