Toro 74418 - Schematics

56 pages

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

Schematics

WireDiagram(Rev.A)

54

Table of Contents

Table of Contents2
Introduction2
Safety4
- Safe Operating Practices4
  - Slope Operation5
  - Maintenance and Storage5
- Slope Chart6
- Safety and Instructional Decals7
Product Overview10
- Controls11
Operation12
- Adding Fuel12
- Checking the Engine Oil Level13
- Using the Rollover Protection System (ROPS)13
- Think Safety First14
- Operating the Parking Brake15
- Starting and Stopping the Engine15
- Stopping the Engine16
- Operating the Power Take off (PTO)17
- The Safety Interlock System17
- Driving Forward or Backward18
- Stopping the Machine18
- Adjusting the Height-Of-Cut19
- Adjusting the Anti-Scalp Rollers19
- Positioning the Seat19
- Unlatching the Seat20
- Pushing the Machine by Hand20
- Using the Side Discharge20
- Transporting Machines21
- Loading Machines21
- Operating Tips22
Maintenance24
Recommended Maintenance Schedule(S)24
Lubrication25
- Greasing and Lubrication25
- Greasing the Mower Deck and Belt Idlers25
- Lubricating the Caster Wheel Hubs26
Engine Maintenance28
- Servicing the Air Cleaner28
- Servicing the Engine Oil29
- Servicing the Spark Plugs30
  - Installing the Spark Plugs31
  - Checking the Spark Plugs31
Fuel System Maintenance32
- Replacing the Fuel Filter32
- Servicing the Fuel Tank32
Electrical System Maintenance33
- Servicing the Battery33
- Servicing the Fuses34
Drive System Maintenance35
- Adjusting the Tracking35
- Checking the Tire Pressure35
- Checking the Wheel Hub Slotted Nut36
- Adjusting the Caster Pivot Bearing36
Cooling System Maintenance37
- Cleaning the Air Intake Screen37
- Cleaning the Cooling System37
Brake Maintenance38
- Adjusting the Parking Brake38
Belt Maintenance39
- Inspecting the Belts39
- Replacing the Mower Belt39
- Replacing the Pump Drive Belt40
- Adjusting the Push Arms40
Controls System Maintenance41
- Adjusting the Control Handle Neutral Position41
Hydraulic System Maintenance42
- Servicing the Hydraulic System42
  - Bleeding the Hydraulic System43
  - Checking the Hydraulic Hoses43
- Setting the Hydraulic Pump Neutral Position44
- Mower Deck Maintenance46
- Cleaning50
  - Cleaning under the Mower50
  - Waste Disposal50
Storage51
Troubleshooting52
Schematics54

Related product manuals

Preview: Toro 74413

Preview: Toro 74416

Preview: Toro 74419

Toro Z453 Z Master 74416TE

Preview: Toro 74408TE

Toro TITAN HD 74467