EasyManua.ls Logo

Toro 74642 - User Manual

Toro 74642
48 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FormNo.3385-346RevA
TimeCutter
®
MX4260Riding
Mower
ModelNo.74642—SerialNo.314000001andUp
Registeratwww.Toro.com.
OriginalInstructions(EN)
*3385-346*A

Table of Contents

Questions and Answers

  • R
    Robin GomezAug 18, 2025
    Why won't my Toro 74642 Lawn Mower engine start?
    • M
      Melissa RiveraAug 18, 2025
      If your Toro Lawn Mower engine is not starting, starts with difficulty, or stops running, several factors could be at play. First, ensure that the fuel tank isn't empty by filling it. If that's not the issue, check if the choke is properly engaged by moving the choke lever to the 'On' position. A dirty air cleaner can also cause problems, so clean or replace it. Inspect the spark plug wire(s) to ensure they are securely connected to the spark plug. If the spark plug(s) is damaged, replace it with a new, correctly gapped one. Also, replace the fuel filter if it's dirty. If there is incorrect fuel in the fuel tank, drain the tank and replace the fuel with the proper type. Finally, make sure that the oil level in the crankcase isn't low by adding oil to the crankcase.
  • R
    Ruben VelazquezAug 21, 2025
    Why is my Toro 74642 Lawn Mower engine overheating?
    • M
      Marco EdwardsAug 21, 2025
      If your Toro Lawn Mower engine overheats, several factors could be the cause. Start by reducing the ground speed, as the engine load might be excessive. Check the oil level in the crankcase and add oil if it's low. Ensure that the cooling fins and air passages under the engine blower housing are free from obstructions. Also, clean or replace the air-cleaner element if it's dirty.
  • D
    Drew ChapmanAug 23, 2025
    What to do if my Toro Lawn Mower engine loses power?
    • J
      jonathanbrownAug 23, 2025
      If your Toro Lawn Mower engine loses power, it could be due to several reasons. Try reducing the ground speed, as the engine load may be excessive. Another cause could be a dirty air cleaner, so try cleaning it. Check the oil level in the crankcase and add oil if it's low. Also, remove any obstructions from the cooling fins and air passages under the engine blower housing. Finally, the spark plug(s) might be pitted, fouled, or have an incorrect gap, so install a new, correctly gapped spark plug(s).
  • C
    Cheryl PatelAug 26, 2025
    How to fix uneven cutting height on my Toro 74642 Lawn Mower?
    • K
      Katelyn BlackAug 26, 2025
      If the cutting height on your Toro Lawn Mower is uneven, several factors could be the cause. Start by sharpening the blade(s). If that doesn't resolve the issue, the cutting blade(s) might be bent, in which case you should install a new cutting blade(s). Ensure that the mower is level from side to side and front to rear. Check that the anti-scalp wheel is set correctly and adjust its height if necessary. Clean the underside of the mower, as a dirty underside can affect cutting height. Finally, ensure the tire pressure is correct and adjust if needed.
  • M
    Molly MartinAug 27, 2025
    How to fix Toro 74642 when the engine overheats?
    • M
      Mrs. Teresa WiseAug 28, 2025
      If your Toro Lawn Mower's engine is overheating, there are several potential causes. First, reduce ground speed if the engine load is excessive. Check the oil level in the crankcase and add oil if it's low. Inspect the cooling fins and air passages under the engine blower housing for obstructions and remove them. Also, make sure that the air cleaner is not dirty; clean or replace the air cleaner element if necessary.
  • A
    Allison WilliamsAug 30, 2025
    Why does my Toro Lawn Mower engine lose power?
    • J
      Jonathan SwansonAug 30, 2025
      If your Toro Lawn Mower engine is losing power, consider these possible causes: The engine load might be excessive, so reduce ground speed. A dirty air cleaner can also cause power loss, so clean the air cleaner element. Check the oil level in the crankcase and add oil if it's low. Make sure the cooling fins and air passages under the engine blower housing are free from obstructions. Inspect the spark plug(s) and replace them if pitted, fouled, or incorrectly gapped. Finally, if there is incorrect fuel in the fuel tank, drain the tank and replace the fuel with the proper type.
  • A
    Amanda BurtonSep 1, 2025
    How to fix uneven cutting height on Toro Lawn Mower?
    • C
      Cynthia WilliamsSep 1, 2025
      To correct uneven cutting height on your Toro Lawn Mower, consider these factors: Sharpen the blade(s) if they are not sharp. Replace any bent cutting blade(s). Level the mower from side-to-side and front-to-rear. Adjust the anti-scalp wheel height if it's not set correctly. Clean the underside of the mower if it's dirty. Adjust the tire pressure to the correct level.
  • J
    Jared WhitakerSep 4, 2025
    How to fix a Toro Lawn Mower when the starter does not crank?
    • M
      Michael DoughertySep 4, 2025
      If the starter on your Toro Lawn Mower isn't cranking, make sure the blade-control switch is disengaged. Also, ensure the motion-control levers are in the park position. If these aren't the issue, the battery might be dead, so charge it. Check the electrical connections for any corrosion or looseness, and replace the fuse if it's blown.
  • J
    Jennifer GonzalezSep 6, 2025
    Why is my Toro 74642 Lawn Mower vibrating abnormally?
    • M
      mary58Sep 6, 2025
      If you're experiencing an abnormal vibration with your Toro Lawn Mower, begin by checking if the engine-mounting bolts are loose and tighten them if necessary. Inspect the engine pulley, idler pulley, or blade pulley for looseness and tighten the appropriate pulley. If the cutting blade(s) is/are bent or unbalanced, install a new cutting blade(s). Check if a blade mounting bolt is loose and tighten it.
  • R
    rasmussenhannahSep 8, 2025
    What to do if the blades don't rotate on my Toro 74642 Lawn Mower?
    • J
      Jennifer SteinSep 8, 2025
      If the blades on your Toro Lawn Mower aren't rotating, the drive belt might be worn, loose, or broken, so install a new drive belt. Another possibility is that the drive belt is off of the pulley, so install the drive belt and check the adjusting shafts and belt guides for the correct position. The mower belt could also be worn, loose, or broken, so install a new mower belt.

Toro 74642 Specifications

General IconGeneral
Starting SystemRecoil
Number of Cutting Positions7
Deck MaterialSteel
Power SourceGasoline
Drive TypeRear-Wheel Drive
Cutting Width22 inches
Oil Capacity20 oz

Related product manuals