Toro 74676 - Positioning the Seat

10.Returntotheseatandengagethebladesby
pullinguptheblade-controlswitch.
11.Risefromtheseat.Thebladesshould
disengageandtheengineshouldcontinueto
run.
12.Returntotheseatandpulluptheblade-control
switch.Thebladesshouldengage.Disengage
thebladesbypushingdowntheblade-control
switch.
13.Pulluptheblade-controlswitchtoengagethe
blades.MovethetractionpedaltotheREVERSE
position.Thebladesshoulddisengage.Move
thetractionpedaltotheNEUTRALposition.
14.Pulluptheblade-controlswitchtoengagethe
blades.TurntheKeyChoiceswitchtotheON
positionandreleaseit.Theoperating-in-reverse
lightshouldilluminate.
15.MovethetractionpedaltotheREVERSEposition.
Thebladesshouldremainengaged.Pushthe
blade-controlswitchintodisengagetheblades.
Theoperating-in-reverselightshouldturnoff.
MovethetractionpedaltotheNEUTRALposition.
16.Ifnotengaged,pushtheSmarkParkswitchto
theONpositionandlightlytapthetractionpedal
toeithertheFORWARDorREVERSEposition.The
brakeshoulddisengageandthebrakelight
shouldturnoff.
Note:Tapthepedal,donotfullyengagethe
pedalasthatcausesthebrakesystemtobind
andnotrelease.
17.Withthebrakereleased,engagethetraction
pedalslightlyandrisefromtheseat.Theengine
shouldshutoff.
18.ReturntotheseatandturnthekeytotheOFF
position.Afterseveralseconds,thebrake
systemshouldengage.
Note:WiththekeyintheOFFposition,the
brakelightdoesnotilluminate.
PositioningtheSeat
Theseatcanmoveforwardandbackward.Position
theseatwhereyouhavethebestcontrolofthe
machineandaremostcomfortable(Figure9).
g027249
Figure9
17