Toro 74676 - Raising the Front of the Machine; Lubrication; Greasing the Bearings

RaisingtheFrontofthe
Machine
Ifthefrontofthemachineneedstoberaised,usethe
veryfrontedgeasshowninFigure36.
Important:Topreventdamagetothesteering
mechanism,usetheveryfrontedgeofthe
machineforajackingpoint.
g028320
Figure36
Lubrication
GreasingtheBearings
ServiceInterval:Every25hours—Greaseallthe
lubricationpoints.
GreaseType:No.2lithiumgrease
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch,andengagetheparking
brake;refertoShuttingOfftheEngine(page24).
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Cleanthegreasettings(Figure37andFigure
38)witharag.
Note:Scrapeanypaintoffthefrontofthe
tting(s).
g027752
Figure37
1.Frontcastertire
decal106-8717
Figure38
Locatedontheseat-panunderside
1.Readtheinstructions
beforeservicingor
performingmaintenance
3.Greaseevery25operating
hours
2.Checkthetirepressure
every25operatinghours
4.Engine
4.Connectagreaseguntoeachtting(Figure37
andFigure38).
5.Pumpgreaseintothettingsuntilgreasebegins
tooozeoutofthebearings.
33