Toro 74938 - Stopping the Machine; Adjusting the Height of Cut

G008952
Figure24
DrivingBackward
1.Movetheleverstothecenter,unlockedposition.
2.Togobackward,slowlypullthemotioncontrollevers
rearward(
Figure25).
G008953
Figure25
StoppingtheMachine
Tostopthemachine,movethetractioncontrolleversto
neutralandmovetolockedposition,disengagethepower
takeoff(bladecontrolswitch(PTO),andturntheignition
keytooff.
Settheparkingbrakewhenyouleavethemachine;referto
SettingtheParkingBrakeinOperation.Remembertoremove
thekeyfromtheignitionswitch.
CAUTION
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemachinewhileitis
unattended.
Alwaysremovetheignitionkeyandsettheparking
brakewhenleavingthemachineunattended,even
ifjustforafewminutes.
AdjustingtheHeightofCut
UsingtheTransportLock
Thetransportlockhastwopositionsandisusedwiththe
deckliftpedal.Thereisalockpositionandaunlockposition
forthetransportposition.Thetransportlockisusedwiththe
deckliftpedal.RefertoFigure26
22