Toro 75500 - Storage

RemovingtheBlades
Replacethebladesiftheyhitasolidobject,orifthe
bladeisoutofbalanceorbent.
1.Placeawoodblockbetweenthebladeand
mowerhousingtopreventthebladefrom
turning.
2.Holdthebladeendusingaragorthicklypadded
glove.
3.Removetheblade.
g343371
Figure33
1.Spindleshaft4.Curvedwasher
2.Adapter5.Nut
3.Blade
SharpeningtheBlades
1.Usealetosharpenthecuttingedgeatboth
endsoftheblade(Figure34).
Note:Maintaintheoriginalangle.
Note:Thebladeretainsitsbalanceifthesame
amountofmaterialisremovedfrombothcutting
edges.
g000552
Figure34
1.Sharpenatoriginalangle.
2.Checkthebalanceofthebladebyputtingitona
bladebalancer(Figure35).
Note:Ifthebladestaysinahorizontalposition,
thebladeisbalancedandcanbeused.
Note:Ifthebladeisnotbalanced,lesome
metalofftheendofthesailareaonly(Figure34).
g000553
Figure35
1.Blade2.Balancer
3.Repeatthisprocedureuntilthebladeis
balanced.
InstallingtheBlades
1.Installthebladeandadapterontothespindle
shaft(Figure36).
Important:Thecurvedpartoftheblade
mustbepointingupwardtowardtheinside
ofthemowertoensurepropercutting.
g343371
Figure36
1.Spindleshaft4.Curvedwasher
2.Adapter5.Nut
3.Blade
2.Installthecurvedwasher(cuppedsidetoward
theblade)andthenut.
3.Torquethenutto35N∙m(26ft-lb).
29