Toro Green Keeper 212 - User Manual

R
MANUAL
START
ON
NEXT
OFF
PROGRAMS
B
CA
GreenKeeper 212 Features:
•EasilyExpandable Up To 12 Stations
With 2-Station Plug-In Modules
•3 Watering Programs With:
- Calendar, Interval and Odd/ Even Days
- 1 Min. to 4 Hrs. Zone Run Time
- 4 Start Times Per Program
•Battery Back-Up
•Automatic Pump Start
•Seasonal Run Time Adjust
•Rain Delay
•Rain Sensor Ready
•Remote Control Ready
•Snap-In Wire Connectors
Automatic Sprinkler System Controller
User’s Guide
(For Indoor Use Only)

Toro Green Keeper 212 Specifications

General

Brand	Toro
Model	Green Keeper 212
Category	Lawn and Garden Equipment
Language	English

Summary

GreenKeeper 212 Introduction

Controller Components Overview

Identifies and describes the main parts of the GreenKeeper 212 controller, including the display, buttons, and dial.

Controller Component Details

LCD Display and Buttons

Details the functions and indicators of the controller's LCD display and control buttons.

Control Dial Functions

Describes the control dial and its different positions for programming and operation.

Controller Features and Settings

Control Dial Positions Explained

Details the specific functions of each setting on the controller's main dial.

Optional Feature Selectors

Explains the function of jumpers and switches for optional features like clock mode and delay.

Connection Terminals and Modules

Describes the connection points for valves, power, sensors, and station expansion modules.

Sprinkler System Basics

System Component Roles

Outlines the three primary components of a sprinkler system: controller, valves, and sprinklers.

Watering Program Essentials

Watering Day Schedule Options

Selecting Watering Days

Explains the four options for scheduling watering days: Calendar, Interval, Odd/Even, and Off.

Watering Program Timing

Setting Program Start Times

Details how to set specific times of day for watering programs to begin.

Setting Station Run Times

Guides users on configuring the duration each station will water.

Watering Schedule Preparation

Watering Guidelines

Provides general advice on optimal watering times and practices for plant health.

Using the Schedule Form

Instructs users on how to complete the provided watering schedule form.

Battery Backup and Programming

Installing the Controller Battery

Provides step-by-step instructions for installing the 9-volt battery for memory backup.

Controller Options and Memory

Configuring Optional Features

Explains how to enable features like 24-hour clock and run delay.

Understanding Controller Memory

Discusses the controller's permanent memory and its default watering schedule.

Controller Memory Reset

Resetting Permanent Program

Guides users on restoring the controller's default factory settings.

Clearing Controller Memory

Details the process for clearing all programmed watering data from the controller.

Controller Programming Basics

Setting Current Time and Day

Step-by-step guide to accurately set the controller's internal clock and calendar.

Watering Day Schedule Setup

Interval Watering Schedule

Odd;Even and Program Off Settings

Setting Odd or Even Schedule

Details how to set watering days based on odd or even numbers of the month.

Turning Off a Watering Program

Explains how to temporarily disable a watering program.

Setting Program Start Times

Setting Station Run Times

Controller Installation Procedures

Mounting the Controller Unit

Provides instructions on how to securely mount the controller unit to a wall.

Valve Wiring Connections

Optional System Connections

Connecting Pump Start Relay

Explains how to wire an optional pump start relay for systems with a pump.

Connecting the Power Transformer

Guides users on connecting the controller's power supply transformer.

Connecting Rain Sensor

Controller Operation Modes

Automatic Watering Operation

Describes how the controller automatically manages watering based on programmed schedules.

Manual Operation of Watering

Manual Program and Station Start

Guides users on initiating watering operations manually.

Watering Control Features

Pause, Resume, and Cancel Watering

Explains how to temporarily suspend, restart, or completely stop an active watering cycle.

Station Skipping and Run Time Adjust

Details how to bypass stations or adjust run times during operation.

Controller Shutdown and Delay Functions

Turning Off the GreenKeeper 212

Explains how to shut down all watering operations by turning the controller to the OFF position.

Using the Rain Delay Feature

Details how to temporarily delay all watering operations for a specified number of days.

Seasonal Watering Adjustments

Service and Specifications

Fuse Replacement and Modules

Provides instructions for replacing the fuse and installing additional station modules.

Troubleshooting Common Issues

Technical Specifications

Toro Warranty Information

Electromagnetic Compatibility