Need help?Do you have a question about the Toro 75744 and is the answer not in the manual?
General| Model | 75744 |
|---|---|
| Product Type | Lawn Mower |
| Cutting Width | 22 inches |
| Engine Type | 4-Cycle |
| Engine Brand | Toro |
| Power Source | Gasoline |
| Deck Material | Steel |
| Mulching Capability | Yes |
Covers crucial safety instructions for operating the lawn mower safely.
Guide to understanding and using the slope indicator for safe operation.
Information on safety decals and their meanings.
Description of the main control panel and its indicators.
Operation and function of the ignition key switch.
How to operate the machine's forward and reverse movement.
Explanation of the lever controlling the machine's ground speed ranges.
Key safety precautions to follow before operating the machine.
General safety guidelines to follow while operating the machine.
Instructions and recommendations for adding fuel to the mower.
Step-by-step procedure for safely filling the fuel tank.
Procedure to test the proper function of the safety interlock system.
How to adjust the operator's seat for comfort and control.
Procedure to adjust the height of the motion-control levers.
Procedure to adjust the tilt angle of the motion-control levers.
General safety guidelines to follow while operating the machine.
Safety precautions and guidelines for operating the mower on slopes.
Safety instructions and precautions for towing the machine.
Essential safety precautions to follow before performing maintenance.
Table outlining maintenance tasks and their service intervals.
Instructions for cleaning and replacing air cleaner elements.
Procedures for checking and changing engine oil and filter.
Instructions for checking, removing, and installing spark plugs.
Procedure for checking and replacing the in-line fuel filter.
Procedures for removing, charging, and installing the battery.
How to check and maintain proper tire pressure.
How to adjust the machine's tracking for straight forward movement.
Procedure for replacing the mower belt.
Procedures for inspecting, removing, sharpening, and installing blades.
Procedures for ensuring the mower deck is level for optimal cutting.
To Next Page
