Toro 79392 - Page 7

g014883
Figure7
1.Frontrightcaster(castor
forkandwheelnotshown
forclarity)
5.Bolt(3/8x1-1/4inches)
2.Fronthole,rightside
6.Foot-assistliftpedal
bracket
3.Existinglocknut(3/8inch)
7.Existingholeinthebracket
4.Rightmountingbracket
8.Locknut(3/8inch)from
looseparts
6.Installtheweightbrackettothemounting
bracketsbyaligningtheoutboardholesinthe
bracketwiththemountingbracketsinstalled
previously(Figure8).
Note:Ensurethatthebracketiscenteredon
theframe.
7.Securetheweightbracketwith2bolts(3/8x1
inch)and2locknuts(3/8inch)(Figure8).
g014879
Figure8
1.Locknut(3/8inch)4.Bolt(3/8x1inch)
2.Weightbracket5.Rightmountingbracket
3.Leftmountingbracket
8.Installaatweighttotheweightbracketand
moveitrearward,ushwiththebracket(Figure
9).
g014880
Figure9
1.Keyedcrossbar
3.Suitcaseweight
2.Flatweight
9.Installasuitcaseweightinfrontoftheatweight
(Figure9).
10.Securetheweightstotheweightbracketwitha
keyed-crossbar(Figure9).Installthebarand
rotateit90degreesdownwardtolockitinplace.
11.Oncealltheweightsandbracketshavebeen
installed,checkthatallthefastenersaretight.
Tightenasnecessary.
Important:Wheneveryouremovethebagger
attachment,remembertoremovethefrontweights
toreturntheproperstabilitytothemachine.
7