Toro 79392 - Page 6

g014878
Figure5
1.Locknut(3/8inch),existing5.Hole,existinginframe
2.Forwardhole,leftside
6.Washer
3.Frontleftcaster(castor
forkandwheelnotshown
forclarity)
7.Bolt(3/8x1-1/4inches)
4.Locknut(3/8inch)from
looseparts
8.Leftmountingbracket
5.Ontherightsideofthemachine,installtheright
weight-mountingbracketasfollows:
•Formachineswithoutafootassistliftpedal,
securethebracketusing2bolts(3/8x1-1/4
inches),2washersand2locknuts(3/8inch)
(Figure6).
Note:Alocknutisfromloosepartsandthe
otherisusedfromearlierremoval.
g014876
Figure6
1.Frontrightcaster(castor
forkandwheelnotshown
forclarity)
5.Bolt(3/8x1-1/4inches)
2.Forwardhole,rightside6.Washer
3.Existinglocknut(3/8inch)7.Existingholeintheframe
4.Rightmountingbracket
8.Locknut(3/8inch)from
looseparts
Note:Formachineswithafoot-assistlift
pedal,thewashersarenotused.
•Formachineswithafoot-assistliftpedal,
Removetheforwardfastenersinthefoot
assistliftpedalbracketandsecurethe
bracketusing2boltsand2locknuts(Figure
7).
Note:Use1locknutfromloosepartsand1
locknutthatyoupreviouslyremoved.
6