Toro DH 210 - Installing the Steering Wheel; Installing the Seat

1
InstallingtheSteeringWheel
Partsneededforthisprocedure:
1
Steeringwheel
1Rollpin
1
Spacer
Procedure
1.Positionthefrontwheelsstraightahead.
2.Installtheplasticspaceroverthesteeringwheelshaft
(smallerdiameterrst).
3.Slidethesteeringwheelovertheshaft,aligningthe
holesoneachsideofthesteeringwheelwiththe
holesinthespacerandwiththeholesintheshaft.
4.Drivetherollpinthroughtheholesinthesteering
wheel,theplasticspacer,andtheshaftwitha
hammertosecurethesteeringwheel.
2
InstallingtheSeat
Partsneededforthisprocedure:
1
Seat
2Bolts
2Adjustingknob
4Flatwashers
2
Springwashers
Procedure
1.Removetheplasticcoverfromtheseatanddiscardit.
2.Settheseatinplaceandsecureitwiththe2bolts,2
springwashers,and2atwashers(Figure1).
G012505
2
1
1
3
Figure1
1.Safetyswitch
3.Adjustingknobsand
washers
2.Boltsandwashers
3.Installthe2adjustingknobsand2washers(Figure1).
4.Ensurethatthesafetyswitchisconnectedtotheseat
(
Figure1).
2