Toro Flex-Force Power System 51830 - Adjusting Cutting Swath and Operating Tips

AdjustingtheCuttingSwath
Thetrimmercomesfromthefactorywithacuttingswathof36.6cm(14inches)asshowninAofFigure15.
Refertothefollowinginstructionstoadjusttheswathto40.6cm(16inches)asshowninDofFigure15.
1.Removetheswathbladefromthebottomoftheguardbyremovingthe2screwsholdingitinplaceusing
theprovidedAllenwrench(BofFigure15)androtatetheswathblade180°.
2.Oncetheswathbladeisrotated,installitontotheguardusingthe2screwspreviouslyremoved(Cof
Figure15).
g281965
Figure15
OperatingTips
•Keepthetrimmertiltedtowardtheareabeingcut;
thisisthebestcuttingarea.
•Thestringtrimmercutswhenyoumoveitfromleft
toright.Thispreventsthetrimmerfromthrowing
debrisatyou.
•Usethetipofthestringtodothecutting;donot
forcethestringheadintouncutgrass.
•Wireandpicketfencescancausethestringto
wearrapidlyandevenbreak.Stoneandbrick
walls,curbs,andwoodcanalsocausethestring
towearrapidly.
•Avoidtreesandshrubs.Thestringcaneasily
damagetreebark,woodmoldings,siding,and
fenceposts.
g268453
Figure16
1.Directionofrotation2.Stringpath
15