Toro Flex-Force Power System 51834 - Installing the Auxiliary Handle

2
InstallingtheAuxiliaryHandle
Partsneededforthisprocedure:
1Auxiliaryhandleassembly
Procedure
1.Separatetheauxiliaryhandlefromthehandleplatebyremovingthe2screws(AofFigure2).
2.Lineuptheauxiliaryhandlewithauxiliaryhandleplateonthetrimmerhandle(BofFigure2).
3.Securetheauxiliaryhandletothehandleplatewiththe2previouslyremovedscrews(CofFigure2).
g331072
Figure2
9